LK93 Question

LK93 Question

Postby ko4nrbs » October 12th, 2016, 2:49 pm

I have an older LK93 54 caliber that I installed the 209 primer kit in. On the end of the breech mechanism is a small thumb screw. I found that it must be adjusted past the little RED circle or the primer will not ignite. At the range I adjusted it out so it would ignite the 209 bit not pierce it. Is this all you do or is there a certain number of threads you must count as you back it out?

Bill
ko4nrbs
 
Posts: 2
Joined: October 6th, 2016, 6:05 pm

Re: LK93 Question

Postby a1smokepole » October 12th, 2016, 7:02 pm

You just screw it out all the way tell it stops.
a1smokepole
 
Posts: 197
Joined: February 23rd, 2012, 6:29 pm
Location: Mandeville La.

Re: LK93 Question

Postby ko4nrbs » October 12th, 2016, 7:06 pm

Thank you!!

I finally found a video of it to.
https://www.youtube.com/watch?v=hFYS1jVrQ24

Bill
ko4nrbs
 
Posts: 2
Joined: October 6th, 2016, 6:05 pm


Return to General Muzzleloader Talk

Who is online

Users browsing this forum: No registered users and 0 guests


cron