safety knob

safety knob

Postby smoothyshot » July 26th, 2013, 11:08 pm

have just come by a unfired tk2000, it uses the red primer plastic. now with it UNLOADED and the knob screwed forward it does not cover the red band and with primary trigger lock saftey off it will pop the cap (209). not good is their a fix? also will the breech plug that does not use the red primer holder but still uses a 209 work on this gun? my breech plug uses a 1/2 socket for removal. I have used bp rifles and smoothys over 40yrs. cap and flint. presently building a 37" 20ga.flinter full stock. thanks for any help with this 12ga. smokey 12
smoothyshot
 
Posts: 5
Joined: July 26th, 2013, 10:51 pm

Re: safety knob

Postby Droptine26s » July 28th, 2013, 7:33 am

Sounds like the threads on the plunger could be gauld up or stripped. Could you post a picture?
Droptine26s
 
Posts: 11
Joined: April 27th, 2012, 4:39 am

Re: safety knob

Postby GMB54-120 » July 28th, 2013, 3:15 pm

When you cock the hammer assembly, the secondary safety will not screw in far enough???
Green Mountain 54-120 Brush Gun
Elite 45 blued
Original DISC 45 SS
LRH 52cal
GMB54-120
 
Posts: 202
Joined: April 19th, 2012, 12:02 pm

Re: safety knob

Postby smoothyshot » July 28th, 2013, 8:24 pm

correct with knob screwed all the way forward it does not cover the red stripe on the hammer and will pop the 209.
smoothyshot
 
Posts: 5
Joined: July 26th, 2013, 10:51 pm

Re: safety knob

Postby GMB54-120 » July 29th, 2013, 4:47 pm

Ok, i just wanted to make sure the plunger was cocked. It would be hard to screw the safety in far enough if the plunger was NOT cocked. It sounds like the threads are boogered or something is in the threads.

I would contact Knight for a new plunger assembly or repair.
Green Mountain 54-120 Brush Gun
Elite 45 blued
Original DISC 45 SS
LRH 52cal
GMB54-120
 
Posts: 202
Joined: April 19th, 2012, 12:02 pm


Return to TK2000

Who is online

Users browsing this forum: No registered users and 0 guests


cron