What load are you using?

Re: What load are you using?

Postby hydrashocker » January 7th, 2013, 11:07 am

for those using Blackhorn - did you have to drill out your breechplug?


No, just using the 209 bare primer conversion breech plug. SKU: M900046 http://www.knightrifles.com/209-convers ... h-plug-46/


What grain bullet and type on the .454?????
hydrashocker
 
Posts: 19
Joined: March 15th, 2012, 5:51 pm

Re: What load are you using?

Postby aquastang » February 6th, 2013, 12:25 am

The 300 gr. Speer Deep Curl performed very well during the late muzzleloader season here in Iowa. Dropped a 10-point in his tracks just as he was getting ready to cross a property line fence. Good thing too, he was headed for deep ravine that I would not have wanted to drag him out of. Got lucky enough to recover bullet as it glanced and logged in right leg...fanned out really nice. Still, I think I'll do a little more work on Bloodlines and Barnes Spitfires before next season. The Barnes shot well once at the range, but I was not able to duplicate. Got some boattail sabots from Harvester and will give them a try.
aquastang
 
Posts: 13
Joined: April 11th, 2012, 9:43 pm

Re: What load are you using?

Postby stevenstell » March 25th, 2013, 8:29 am

I see where someone is using fffg 777 in there kp-1. I was under the impression that we are to use only ffg 777. in Colorado we cannot use sabots either. I have seen folks using hornaday and pb. does anyone have the latest and greatest for the kp-1 loads.
stevenstell
 
Posts: 4
Joined: March 11th, 2013, 7:56 pm

Re: What load are you using?

Postby lily » August 8th, 2014, 1:58 am

The metal dectors really the good device to use,you can get more details at detectorall.com
lily
 
Posts: 2
Joined: August 5th, 2014, 10:57 pm

Re: What load are you using?

Postby two » August 14th, 2014, 5:00 am

Wrote:"Oh by the way, I pulled out the jacketed breech plug and bought a Bare 209 breech plug from Knight...."

Talking about the wireless, i would like to recommend the wireless two way car alarm ,this is have the good working condition,you can have a look at
two
 
Posts: 1
Joined: August 14th, 2014, 4:54 am

Previous

Return to KP1

Who is online

Users browsing this forum: No registered users and 0 guests